Toshiba T3100e - HDD Seek to Landing Zone Procedure; HDD Seek to Landing Zone Program Description; HDD Seek to Landing Zone Operations

File No. 960-010
3.18 SEEK TO LANDING ZONE (HOD)
3.18.1 Program description
When moving the unit, if an HOD head hits a data area severely,
the data will be lost. In order to protect the data, this
program moves HOD heads to safe areas. These areas called
"landing zone".
NOTE: The built-in hard disk drive controls automatically the
heads to move to the landing zone at power down.
3.18.2 Operations
1. After pressing 3 and Enter in the DIAGNOSTICS MENU, the
program is automatically executed and the following message will
appear.
Landing seek completed. (HOD#1)
Press [Enter] key.
2. After pressing Enter, the DIAGNOSTICS MENU appears.
3-35