Toshiba T3100e - Log Utilities Operations

File No. 960-010
3.20.2 Operations
1. After pressing 5 and Enter in the DIAGNOSTICS MENU, the
error information logged in the RAM or on the floppy disk is
displayed as shown below.
XXXXX ERRORS
CNT TS-NAME
001 FDD 02
001 FDD 01
PASS
0000
0000
STS ADDR
103 00001
180 00001
r
Address
Error status
WD RD
00 00
00 00
I
HSTS [ERROR STATUS NAME]
FDD - WRITE PROTECTED
FDD - TIME OUT ERROR
Read data
Pass count Write data
Error status name
Subtest number
Test name
Error count
[[1:Next,2:prev,3:Exit,4:Clear,5:Print,6:FD LogRead,
7 :FD LogWrite ]]
2. Error information displayed on the screen can be manipulated
with the following key operation.
The 1 key scrolls the display to the next page.
The 2 key scrolls the display to the previous page.
The 3 key returns the display to the DIAGNOSTIC MENU.
The 4 key erases all error log information in RAM.
The 5 key outputs error log information to a printer.
The 6 key reads log information from a floppy disk.
The 7 key writes log information to a floppy disk.
3-38