Toshiba T3400CT - TFT Color Fluorescent Lamp Unit Installation Steps

T3400, T3400CT
4-41
Installation
To install the TFT color fluorescent lamp unit, follow the steps below and refer to Figure 4-
31.
1. Noting display cable routing, press into underlying groove, then seat the FL unit in
the frame and secure four M2x4 silver screws (Figure 4-31).
2. Replace the display module, FL inverter board, display mask, and battery pack as
described in sections 4.17, 4.14, 4.13, and 4.2.