T3400, T3400CT
3. If the panel surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty,
breathe on the surface to create a light condensate and wipe again.
If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent
to a cloth and then wipe the surface. Do not apply cleanser directly to the panel.
4. Water or other liquids left on the surface for a long period can change the screen
tint or stain the screen. Be sure to quickly wipe off any liquid.
5 Do drop or strike the LCD module with a hard object, glass used in the panel
could break or crack.
To Next Page
Loading...
