T3400, T3400CT
3.13 PCMCIA Test
NOTE: The PCMCIA wraparound card is required to execute this subtest.
Subtest 01 I/O Card Test (PCMCIA)
This test checks the following signal lines of the PCMCIA slot:
❑ Address line
❑ REG#, CE#1, CE#2 line
❑ Data line
❑ Speaker line
❑ Wait line
❑ BSY#, BVD1 line
This subtest is executed in the following order:
Sub# Address Good Bad Contents
01 00001 nn xx Address line
00001 nn xx REG#, CE#1, CE#2
nn=A0, 90, 80, 00
02 00002 ww rr Data line
ww=write data, rr=read data
03 00003 –– –– Speaker line
04 00004 40, 80 xx Wait line (40<xx<80)
05 00005 nn xx Other lines (BSY#, BVD1)
nn=21, 00
To Next Page
Loading...
