This program displays the following system configuration.
1. BIOS ROM VERSION = VX.XX
2. Base memory size
3. Display type
4. A number of floppy disk drives
5. A number of async ports
6. A number of hard disk drives
7. A number of printer ports
8. Co-processor presents or not
9. Extended memory size
3.23.2 Operations
After pressing 8 and Enter key to select from the DIAGNOSTICS MENU,
the following display will appear.
SYSTEM CONFIGURATION
*-BIOS ROM VERSION - VX.XX
*-640KB MEMORY
*-PLASMA DISPLAY
*-1 FLOPPY DISK DRIVE(S)
*-2 ASYNC ADAPTER(S)
*-1 HARD DISK DRIVE(S)
*-1 PRINTER ADAPTER(S)
*-0 MATH CO-PROCESSOR
*-0000KB EXTENDED MEMORY
PRESS [ENTER] KEY
Press Enter key to return to the DIAGNOSTICS MENU.
~~
DOC:MAINTENANCE MANUAL
MODEL:T5200
MODEL:T5200C
CHAP:3 TESTS AND DIAGNOSTICS
SECT:3.24, SETUP
DOC_ID:3.24 T5200
LANG:ALL
TEXT:
<fig id=MMS\5200\52003_44.TIF>Page 3-44</fig>
3.24 SETUP
3.24.1 Accessing the SETUP
Press: 0 followed by Enter, and the following screen appears:
[[ System setup ]]
1. Hard disk type =9-Cyl=776, h=8, S/T=33, Cap=100MB
2. Memory size
System memory =640KB
Extended memory= 1MB
Expanded memory= 0MB+288KB(96KB used as a fast
ROM)
To Next Page
Loading...
