6
Functions of buttons (Continued)
K: CHECK button This button is used only when servicing the air conditioner.
Do not use the CHECK button for normal operation.
L: CENTRAL
CTRL button Use this button to inhibit individual operation by remote controller as
follows:
1: Individual ON/OFF operation is inhibited.
2: Individual ON/OFF, MODE and Temperature setting operation is
inhibited.
3: Individual MODE and Temperature setting operation is inhibited.
4: Individual MODE operation is inhibited.
No indication: Central control is cleared. (Individual operation)
M: SET button This button is used for setting indoor unit’s address when installing the
air conditioner.
Do not use the SET button for normal operation.
N: CL button Use this button to reset the filter sign .
The air conditioner has the timer for the filter and informs you when the
filter needs cleaning.
O: VENTILATION button Use this button when you installed a fan available in the market.
Pressing this button turns on and off the fan.
When turning off the air conditioner, the fan will also turned off. While
the fan is operating, will appear in the display.
If is displayed when pressing the ventilation button, no fans are
installed.
CAUTION
NOTE
OI-673-06EG
01_TCB-SC642TLE_EG.fm Page 6 Friday, June 18, 2004 10:02 PM
To Next Page
Loading...
Need help?
General
