EasyManua.ls Logo

Toshiba TDP ET20/U - Setup MENU

Toshiba TDP ET20/U
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Setup MENU
Language
Select a language used in menu system.The following ten languages are available.
- English
- French (Français)
- Germany (Deutsch)
- Italian (Italiano)
- Spanish (Español)
- Portuguese (Português)
- Japanese (
本語
)
- Simplified Chinese (
)
- Traditional Chinese (
繁體
)
- Korean (
한국
)
Press
. Select with / [UP] [DOWN] key.
H-Keystone
Correct the horizontal keystone distortion of the screen.
Press
. Adjust with / [ - ] (Shrinking leftward) or / [ + ] (Shrinking rightward) key
V-Keystone
Correct the vertical keystone distortion of the screen.
Press
. Adjust with / [ - ] (Shrinking downward) or / [ + ] (Shrinking upward) key
Notes
Depending on the amount of keystone adjustment and the content of images, some infor-
mation may be lost, or the picture quality may suffer.
Keystone adjustment will not change the shape of the menus (OSD) and the background
(with no signal input).
Lamp Time Reset
Reset the lamp timer to zero.
This should only be done after the lamp has been replaced.
Press
. Confirmation window will appear and select [Yes] with / [ - ] or / [ + ] key
and press
to reset.
Lamp Power
Set the lamp power.
When lamp power is set to high, the screen becomes brighter, but the fan noise become a
little increased.
Press
. Select from Standard/High with / [UP] [DOWN] key.
Fan mode
Set the cooling fan speed.
Using menus (Continued)

Related product manuals