101
Learning the Basics
Starting a program
5.375 x 8.375 ver 2.3
To turn off the numeric overlay, hold down the Fn key and
press
F11 again. The numeric mode light on the keyboard
indicator panel goes out.
Using the cursor control overlay
To turn on the cursor control overlay, press Fn and F10
simultaneously. The cursor control mode light on the
keyboard indicator panel glows when the cursor control
overlay is on.
Once the cursor control overlay is on:
To turn off the cursor control overlay, hold down the
Fn key
and press
F10 again. The cursor control mode light on the
keyboard indicator panel goes out.
Starting a program
The easiest way to start a program is to double-click the name
of the file that contains the information you want to work on.
To find the file, use My Computer or Windows
®
Explorer.
If you prefer to open the program first, you have the
following options:
❖ Double-click the icon for the program on your desktop.
❖ Use the Start menu.
To Procedure
Type lowercase
letters
Press and hold down
Fn while you type the
letters.
Type uppercase
letters
Press
Fn and Shift simultaneously while
you type the letters.
Use the numeric keys Press and hold down
Shift while you use
the overlay keys, then release
Shift to
return to the cursor control overlay.
To Next Page
Loading...
