186
Toshiba Utilities
TOSHIBA Hardware Setup
5.375 x 8.375 ver 2.3
The TOSHIBA HW Setup screen appears.
Sample TOSHIBA HW Setup screen – General tab options
The TOSHIBA HW Setup screen has the following tabs:
❖ General—Allows you to view the current BIOS version
or change certain settings back to their default values
❖ Device Config—Shows the Device configuration options
❖ Display—Allows you to change various default settings
for the built-in LCD display
When the computer restarts, it remembers the last
configuration. If data does not appear on the display you are
using after starting in Standby Mode, press Fn + F5.
❖ CPU—Allows you to enable or disable CPU frequency
switching modes.
Dynamically Switchable—This mode is the default setting
for your computer, and automatically changes the processing
frequency and decreases voltage depending on the power
source:
To Next Page
Loading...
