58
Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
Installing a memory module with the computer’s power on may
damage the computer, the module, or both.
The computer has two memory module slots — Slot A and
Slot B. You can install one or two memory modules.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
If the computer is on, begin at step 1; otherwise skip to step 3.
1 If the computer is on, click Start, Turn Off or Shut down
(depending on the system).
The Turn off computer or Shut Down window appears.
2 Click Turn Off or Shut down.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the
computer, including the AC adapter.
4 Remove the main battery. For information on removing
the main battery, see “Removing the battery from the
computer” on page 128.
5 Close the display panel and turn the computer upside
down to locate the memory module slot cover.
To Next Page
Loading...
