68
Getting Started
Hard Drive Recovery Utilities
5.375 x 8.375 ver 2.3
Recovering the original factory image
(recommended)
Recovering a hard disk drive to its factory default setting
deletes all partitions on the hard disk drive and your
information will be lost. Be sure to save your work on external
media before proceeding.
1 On the TOSHIBA Recovery Wizard screen, select Recovery
of Factory Default Software, then click Next.
The Recovery of Factory Default Software screen appears.
Sample Recovery of Factory Default Software screen
2 Select Recover to out-of-box-state, then click Next.
A confirmation message displays reminding you that all
data will be lost during the recovery process. Be sure you
have saved your work before proceeding.
3 Click Next to begin the recovery. Once complete, a
message displays that the HDD has been recovered.
To Next Page
Loading...
