To Next PageTo Next PageWhy does my Toshiba Projector say 'NO INPUT IS DETECTED ON ***'?
This message on your Toshiba Projector means there is no input signal. Confirm the signal input connection and the status of the signal source.
Why do colors have a faded-out appearance, or color tone is poor on my Toshiba TLP-SX3500 Projector?
If the colors on your Toshiba Projector appear faded or the color tone is poor, adjust the color settings by changing the COLOR BAL R, COLOR BAL G, COLOR BAL B, COLOR, and/or TINT settings in the menu.
What to do if my Toshiba TLP-SX3500 shows 'There is a possibility that the interior portion has become overcooled'?
If your Toshiba Projector displays this message, use the unit within the specified temperature range (0°C to 35°C). After doing so, reset the power to ON.
What does 'SYNC IS OUT OF RANGE ON *** fH *****kHz fV *****Hz' mean on my Toshiba TLP-SX3500 Projector?
This message on your Toshiba Projector indicates that the horizontal or vertical wavelength of the input signal is outside the unit's response parameters. Check the specs for the unit or the signal source.
What does it mean if my Toshiba TLP-SX3500 Projector says 'It is time to clean the air filter, or there is no filter cover'?
This message on your Toshiba Projector means you should immediately turn the power OFF and either clean or change the air filter. After cleaning or changing the filter, be sure to reset the filter timer.
What to do if my Toshiba TLP-SX3500 Projector cooling fan is not operating?
If the cooling fan on your Toshiba Projector is not working, turn the power off and let the unit cool down for at least 20 minutes. After it has cooled, check that no foreign objects are caught in the fan, and then turn the power back on.
What to do if my Toshiba Projector shows 'Either there is no lamp and/or lamp cover, or either of these has not been properly fixed'?
If your Toshiba Projector displays this message, turn the power off and let the unit cool down for at least 45 minutes. After cooling, check the attachment of the lamp and lamp cover, and then turn the power back on.
What to do if my Toshiba Projector shows 'REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK'?
This message on your Toshiba Projector indicates that the filter timer has reached the interval set in the OPTION menu. Clean or change the air filter, and then reset the filter timer.
What does it mean when my Toshiba TLP-SX3500 Projector says 'CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. THE POWER WILL TURN OFF AFTER 0 hr.'?
This message on your Toshiba Projector means that the lamp timer has reached 2000 hours, and the power will soon turn off automatically. Immediately turn the power off, change the lamp, and reset the lamp timer.
What does it mean when my Toshiba TLP-SX3500 Projector says 'CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. THE POWER WILL TURN OFF AFTER ** hr.'?
This message on your Toshiba Projector indicates that the lamp timer is approaching 2000 hours, and a lamp change within the specified time is recommended. The power will automatically turn off when the lamp reaches 2000 hours. Change the lamp and reset the lamp timer.
General| Contrast Ratio | 2000:1 |
|---|---|
| Display Type | 3LCD |
| Projection Size | 30 to 300 inches |
| Resolution | XGA (1024 x 768) |
| Lamp Life | 2000 hours (normal mode), 3000 hours (eco mode) |
| Input Ports | S-Video |
| Outputs | Audio |
