EN-10
E6582071
EN
(1) The operation status is displayed with the
following symbols.
(Rotating): In operation, the rotation direction is
also indicated
: Stop
(Blinking): Waiting for execution of operation
after emergency stop
(2) The operation status is displayed with the
following text.
"RUN": Motor in operation
"STOP": Stopped
"Trip": Trip has occurred
"JOG": In jog run
(3) The output frequency is displayed in Hz.
(4) The run commands are displayed with icons.
: Run
: Stop
(5) The remaining capacity of the battery ( yes/
no) is displayed with icons.
(6) The current time ("hour/minute") is displayed.
(7) Current display mode
[Standard mode] is displayed.
(8) Normally, the output frequency (standard default
setting) is displayed.
When an alarm or trip occurs, its contents are
displayed.
(9) The functions assigned to the [F1] - [F4] keys are
displayed.
Setting of LCD screen
When you press the [F2] key ("LCD screen") in [Standard
mode], the LCD setting screen is displayed.
Language selection
Select a language to be displayed from the list.
Date/time setting
Set the date and the time.
The time is represented in HH:MM and the date in YYYY/
MM/DD.
Contrast adjustment
The contrast can be adjusted in the range of 30 -70%. The
default setting is 50%.
Automatic off time
The off time of the backlight can be set in the range of 0
min (always on) - 10 min (off after 10 minutes).
The default setting is 3 min.
Website
Information is displayed.
Language selection
Date/Time settings
Screen contrast
Standby
Internet website
Top View Language
Monitor
0.0HzSTOP
12:49
2000/08/24
50%
3min
Keypad settings
English
日本語
Top View
Monitor
0.0HzSTOP
12:45
Language selection
Top View
Monitor
0.0HzSTOP
12:46
Date/Time settings
12:46
2000/08/24
0.0HzSTOP
12:47
Screen contrast
Min: 0 Max: 100
X1000 X100 X10 X1
50
%
0.0HzSTOP
12:47
Standby
Min: 0 Max: 10
X1000 X100 X10 X1
3
min
0.0HzSTOP
12:48
Internet website
Scan QR code to
access internet
website
ESC =Cancel
Top View
Monitor
To Next Page
Loading...
