Toshiba TOSVERT VF-AS3 - Page 11

EN-11
E6582071
EN
6
6
6
6
6
6
6
6
Operate the inverter by keypad
Easy operation (e.g. Panel [RUN] / [STOP] key operation)
It is necessary to set the parameter <CMOd> and <FMOd>.
Switching of backlight color
When you press the [F3] key ( mark), you can change
the color of the backlight to white or red.
(1) Press [ESC] key to switch to [Setting mode] from
[Standard mode] to set the parameters.
Select [Basic parameters] and press [OK] key.
Setting screen of [Basic parameters] is displayed.
(2) Select <CMOd> and press [OK] key.
Setting screen of <CMOd> is displayed.
(3) Select “1: Operation panel,Ext panel” and press [OK]
key.
The screen returns to [Basic parameters].
Verify that the <CMOd> setting is “1”.
(4) Select <FMOd> and press [OK] key.
Setting screen of <FMOd> is displayed.
Language selection
Date/Time settings
Screen contrast
Standby
Internet website
Top View Language
Monitor
0.0HzSTOP
12:49
2000/08/24
50%
3min
Keypad settings
1. History function
2. Direct access
3. Guidance function
4. Basic parameters
5. Extended parameters(F - - -)
Top View
0.0HzSTOP
02:31
Monitor
Parameter Setup Mode
AUL : Inverter OL characteristic
AU1 : Automatic Acc/Dec
AU2 : Torque boost macro
CMOd : Run command select
FMOd : Frequency command 1
0.0HzSTOP
02:31
Basic parameters
0
0
0
1
10
0: Terminal
1: Operation panel,Ext panel
2: Embedded Ethernet
3: RS485 com (connector 1)
4: RS485 com (connector 2)
0.0HzSTOP
02:32
CMOd :Run command select
AUL : Inverter OL characteristic
AU1 : Automatic Acc/Dec
AU2 : Torque boost macro
CMOd : Run command select
FMOd : Frequency command 1
0.0HzSTOP
02:31
Basic parameters
0
0
0
1
10
AUL : Inverter OL characteristic
AU1 : Automatic Acc/Dec
AU2 : Torque boost macro
CMOd : Run command select
FMOd : Frequency command 1
0.0HzSTOP
02:34
Basic parameters
0
0
0
1
1