Toshiba TOSVERT VF-AS3 - Page 12

EN-12
E6582071
EN
6
6
6
6
6
6
6
6
(5) Select “10: Touch wheel 1 (power off or press OK to
save)” and press [OK] key.
The screen returns to [Basic parameters].
Verify that the <FMOd> setting is “10”.
(6) Press [ESC] key.
(7) Press [ESC] key several times to return to [Standard
mode].
(8) Press [OK] key in [Standard mode].
Setting screen of <FC> is displayed.
(9) Change the output frequency command by touch
wheel.
Setting value (e.g. 50.0 Hz) is highlighted.
(10) Press [OK] key to return to [Standard mode].
7: -
8: -
9: -
0.0HzSTOP
02:33
FMOd :Frequency command 1
6: -
10: Touch wheel 1 (off or press OK)
AUL : Inverter OL characteristic
AU1 : Automatic Acc/Dec
AU2 : Torque boost macro
CMOd : Run command select
FMOd : Frequency command 1
0.0HzSTOP
02:33
Basic parameters
0
0
0
1
10
1. History function
2. Direct access
3. Guidance function
4. Basic parameters
5. Extended parameters(F - - -)
Top View
0.0HzSTOP
03:22
Monitor
Parameter Setup Mode
Top View Mode
Easy Keypad Copy Monitor
Hz
0.0HzSTOP
0.0
03:26
0.0HzSTOP
04:11
FC :Panel frequency
Min: 0.0 Max: 50.0
X1000 X100 X1X10
Output frequency
0.0Hz
0.0Hz
0.0HzSTOP
04:11
FC :Panel frequency
Min: 0.0 Max: 50.0
X1000 X100 X1X10
Output frequency
0.0Hz
50.0Hz
Top View Mode
Easy Keypad Copy Monitor
Hz
0.0HzSTOP
0.0
02:36