E6581539
- 4 -
Preface
Thank you for purchasing the “Metasys
®
N2 option (MTS001Z)” for TOSVERT VF-PS1 inverter. By
Installing this board into the VF-PS1, data communication can be made with a host computer or
other device via Metasys
®
N2 network.
Before using this unit, carefully read this instruction manual in order to completely and correctly
utilize excellent performance of this unit. Besides this instruction manual, the “Metasys
®
N2 option
Function Manual” which includes the contents to install into Metasys
®
N2 network is prepared. If it is
required, please contact with our branch offices, sales offices or web site “www.inverter.co.jp”.
(“Metasys
®
N2 option Function Manual”: E6581540)
After reading this instruction manual, please keep it handy for future reference.
* Metasys
®
N2 is a registered trademark of Johnson Controls Inc.
- Part numbering
MTS 001 Z
–
0
Revision number
Cable length ( “Z” means “without cable” )
Model number of Metasys
®
N2 option
Symbol of Metasys
®
N2 option
- Accessory check list
Metasys
®
N2 communication option is shipped together with the following accessories. On
opening the packing case, check to see if the following accessories are contained or not.
(1) Metasys
®
N2 option (MTS001Z) .......1 board
Connector: MSTB2.5/4-STF-5.08
Manufactured by PHOENIX CONTACT
(3) Instruction manual for the VF-PS1 Metasys
®
N2 option ........ 1 copy
English: E6581539
(This manual)
(4) LED name label ......... 1 sheet
Manual
To Next Page
Loading...
