Toshiba TOSVERT VF-S15 series Communication Function Manual

E6581911
- 14 -
Warning
Mandatory
action
Set up “Communication error trip function (c100 ~ c103)” to stop the inverter when
CANopen communication is deactivated.
When CANopen state is “OPERATIONAL”, the CANopen communication parameters
can not be changed. Set the CANopen state to “PRE-OPERATIONAL.”
When the parameters are changed, the power must be cycled to the VF-S15 for the
changes to take effect.

Toshiba TOSVERT VF-S15 series Specifications

General

Series	VF-S15
Category	Inverter
Control Method	V/f control, Sensorless vector control
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit
Communication Options	Modbus
Braking Unit	Built-in
Power Rating	0.4 kW to 15 kW
Input Voltage	Single-phase 200 to 240V, Three-phase 200 to 240V, 380 to 480V
Cooling Method	Fan cooling