E6581611
E-20
5
2) Automatic switching by frequency command
Frequency priority selection parameter f200 = 1
Switch frequency command set with fmod and f207 automatically according to the frequency command
entered.
If the frequency set with fmod is above 1Hz: The frequency command set with fmod
If the frequency set with fmod is 1Hz or less: The frequency command set with f207
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
