E6581611
E-25
5
* The f702 converts the following parameter settings:
In case of f703=0
Free unit Frequency monitor display Output frequency, Frequency command value, PID
feedback value, Stator frequency, During stop: Frequency
command value (During operation: Output frequency)
Frequency-related parameters fc, fh, ul, ll, sr0 sr7,
f100, f101, f102, f167, f190, f192,
f194, f196, f198, f202, f204, f211,
f213, f217, f219
f240, f241, f242, f250, f260, f265,
f267, f268, f270 to f275,
f287 f294, f330, f331, f346, f350,
f367, f368, f383,
f390 to f393, f505, f513, f649, f812,
f814, a923 to a927
In case of f703=1
Free unit PID control -related parameters fpid, f367, f368
Note) The unit of the Base frequency 1 and 2 are always Hz.
An example of setting when fh is 80 and f702 is 10.00
f705=1, f706=0.00 f705=1, f706=20.00
f705=0, f706=80.00
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
