Toshiba W-412 - Identification of Controls; Front Panel; Remote Control

Reference Information
2-4 Toshiba
15
PREPARATION
8
Press
ENTER
to start the “AUTO” clock
set feature.
After the VCR is turned off, it automatically updates the clock using the data broadcast by the local TV stations. *
The clock is
revised by broadcasting signal at 8:00 A.M every morning.
9
Select the options using
FF
or
REW
.
Change the data using
PLAY
or
STOP
.
1) Set “SUMMER TIME
(Daylight-Saving Time)”.
DST start: Daylight-saving time begins on the first Sunday in April. Because the clock automatically changes from 2:00 AM to 3:00 AM (forward one hour). DST end: Daylight-saving time ends on the last Sunday in October. The VCR clock automatically changes from 2:00 AM to 1:00 AM (back one hour).
remember that any part of a scheduled Timer Recording that falls between these two times will not be recorded.
AUTO: the VCR is using the clock data
Broadcast by the local TV stations.
IN: You want to use the DST function, and you are leaving in the area that apply Daylight-saving time. OUT: You are not leaving in the area that apply Daylight-saving time and you do not want to use DST function.
2) Set “TIME ZONE”.
If you select “AUTO” for your time zone, the VCR sets the clock using the first Coordinated Universal Time information it finds. If the time is not correct, select another time zone or use the “MANU”
option.
3) Set “CLOCK DATA CH”.
If you don't know the clock data channel, select “AUTO”. The VCR will scan automatically to tune the channel carrying the clock data.
If AUTO CLOCK SET is unsuccessful, set the time and date through the “MANU” clock
set menu selection.
10
Press
PROG.
.
Now the clock starts.
Setting the Clock
Example: To set the clock to 2:30 p.m. on August 25 (summer time) 2001. 1
Press
PROG.
.
The MENU screen appears on the TV.
2
Select “PRESET” using
FF
or
REW
,
and press
ENTER
.
3
Press
ENTER
to select “CLOCK SET”.
4
Select “AUTO” or “MANU” using
PLAY
or
STOP
.
AUTO
: The VCR automatically sets or
adjusts the clock. If you select “AUTO” mode, proceed to step 8.
MANU
: You can set the clock manually.
If you select “MANU” mode, proceed to next
step.
5
Vary the digits to set the hour. PLAY
: To increase.
STOP
: To decrease.
6
Move to the next using
FF
(To move back, press
REW
.)
7
Repeat step 5 and 6 to set the minutes, month, day, and the year (by the last two digits). Proceed to step 10 to start the clock.
E
n
D : PROG
ENTER
CLOCK SET
SUMMER TIME
TIME ZOnE CH
2
SCAnnInG
n
O
W
E n D : PROG
ENTER
CLOCK SET
SUMMER TIME
TIME ZO
nE CH
P R E S S E n T E R
T O S T A R T S E T T I n G
E
n
D : PROG
ENTER
CLOCK SET
CH MEMORY
14
Optional settings on the SET UP screen Other optional settings can be made. Press
ENTER
while “SET UP” is selected on the MENU screen.
The screen turns to the SET UP screen. To exit, press
PROG.
once
.
E
n
D : PROG
TAPE LE
n
GTH
120 160 180
COU
n
TER MEM
on off
LA
n
GUAGE E
n
G FRA ESP
Setting the Language
1
Press
POWER
to turn on the VCR.
2
Press
PROG.
.
The following screen appears on the TV.
PREPARATION
Initial Settings Using On-screen Display
The language selection and clock setting must be set first when VCR is first plugged in or after it encounters a power failure.
Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
• Press
VCR
to set the remote control operating the VCR.
4
Press
PROG.
to return to the normal TV screen.
MEnU
E
n
D : PROG
ENTER
POWER
VCR
FF
PLAY, STOP
ENTER
PROG.
SLOW
PAUSE/STILL
STOP
FF
REC
TIMER
VC-413
TV
VCR
POWER
I.SELECT
SP/SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
1
2
3
4
5
0
100
6
REW
PLAY
REMAIN/
RESET
COUNT
9
8
7
EJECT
REW
STOP
FF
PLAY
REW
ENTER
3
Select the language using
PLAY
or
STOP
and press
PROG.
.
The screen turns to the MENU screen.
Page 23
To change the language, move down here and set to the desired one.
Page 22