Toshiba W-603 - Storing Channels on the VCR; Incoming Antenna;Cable(CATV) Signals

To Next Page

To Previous Page

Reference Information

2-10 Toshiba

RECORDING

If a power failure occurs during the

timer program recording

• When a power failure has occurred, “- -:- -”

appears in the VCR display. Since the

programmed contents have been cleared,

reset the clock and timer programming.

• When power has failed for a short time, the

colon of the current time display blinks. The

programmed contents are not affected. Reset

the clock.

Overlaps of the programs

If two timer programs overlap, the recording start

time of program 1 has priority over the recording

off time of program 2.

Program 1

(Start time)

Program 2

(Start time)

Overlapped portion

(not recorded)

Confirming the timer programs

Press PROG while timer recording.

The screen for confirming will appear.

This screen can be sure only in the Timer

Recording mode.

Changing/cancelling the timer

programs

1) If the TIMER indicator is lit, turn the VCR on by

pressing POWER.

2) With steps 2 to 9, change the items.

To cancel a program, select the program you

want to cancel in step 4, and press CANCEL.

The line is then cleared.

3) Press POWER to return to the timer standby

mode.

Error indication

The blinking “TIMER” indicator appears in the

VCR display if you press both TIMER when:

–– a cassette is not loaded.

–– the loaded cassette has no safety tab.

In these cases, a recording can not be made.

E n D : PROG

SET UP

PRESET

PROGRAM

CH DATE O

OFF SPD

- - -/-- -:- - -:- - -

2 5 8/30 9:30 10:00 SP

Auto Speed Select

If you are not sure the tape is long enough for

timer program recording in the SP tape speed,

set the recording tape speed to “AUTO”.

Recording starts in the SP tape speed and the

VCR automatically selects the tape speed to

record the program to the end. If the tape length

is not long enough, the tape speed automatically

changes from SP to SLP.

Move to the next using CURSOR

( ), and set the recording date

using CURSOR (

▲

) or (

▼

The date changes as follows:

[WKLYSU]

…

[WKLYSA]: You can record TV programs on the same

channel on the day and time every week.

[MO~FR]: You can record TV programs on the same channel on the

day and time Monday through Friday.

Move to the next using CURSOR

( ), and set the hour and minutes

of the recording start time.

Move to the next, and set the

recording off time.

Move to the next, and select the

tape speed (SP) using CURSOR

(

▲

) or (

▼

For the tape speed “AUTO (Auto Speed

Select)”, see below.

To set another program, press CURSOR

( ), and select the next line pressing

CURSOR (

▼

Repeat steps 4 to 8.

Press PROG..

Now programming is completed.

Press both TIMER simultaneously.

The power turns off and the VCR enters

the timer standby mode.

Notes

• Make sure that the tape length is selected correctly

according to the tape used on the SET UP screen

(page 22).

• When the SLP tape speed is selected and the tape

length is not sufficient to record the program to the

end, the program cannot be recorded to the end.

• The picture will be distorted when playing the part

where the recording tape speed is switched from

SP to SLP with the Auto Speed Select feature.

Hi-Fi

STEREO

SAP

TIMER

Timer Program Recording (continued)

→ 8/25 → 9/25 →

…

→ 7/25 →

WKLY

SU →

…

MO~FR ←

WKLY

SA ←

TIMERREC

E n D : PROG

SET UP

PRESET

PROGRAM

CH DATE O

OFF SPD

- - -/-- -:- - -:- - -

2 5 8/30 -:- - -:- - SLP

D : PROG

SET UP

PRESET

PROGRAM

CH DATE O

OFF SPD

- - -/-- -:- - -:- - -

2 5 8/30 9:30 -:- - SLP

E n D : PROG

SET UP

PRESET

PROGRAM

CH DATE O

OFF SPD

- - -/-- -:- - -:- - -

2 5 8/30 9:30 10:00 SLP

D : PROG

SET UP

PRESET

PROGRAM

CH DATE O

OFF SPD

- - -/-- -:- - -:- - -

2 5 8/30 9:30 10:00 SP

▼

Toshiba W-603 - Storing Channels on the VCR; Incoming Antenna;Cable(CATV) Signals

Table of Contents

Other manuals for Toshiba W-603

Related product manuals