15
Table of Contents
5.9 MOUNTING INSTRUCTIONS
Installation to DIN rail
The Lock can be installed to DIN rail with the clip and
screws included in the sales package. There are M3
grooved mounting holes on three sides of the equipment.
For attachment on either of the narrow sides, the screws
with length of 10 mm shall be used. For attachment on the
bottom of the Lock, the screws with length of 6mm shall
be used. The screws shall be placed through the bottom
sticker which has the hole locations indicated.
Please see pictures 1 - 4 for the mounting options.
Picture 1.
Picture 2. Picture 3.
To Next Page
Loading...