Tosibox Lock 200 - Remote Serialization of Extra Keys

26
Table of Contents
6.4 REMOTE SERIALIZATION OF EXTRA KEYS
This feature is only available for Keys that have already
been serialized locally.
Insert the Key into the USB port of the computer and wait for the 1.
TOSIBOX
®
Key application to start.
Choose ”Manage Keys” from the “Devices” menu in the user 2.
interface and open the “Sub Keys” tab.
Choose the extra Keys to which you want to serialize new Locks and 3.
press the ”Serialize...” button.
Choose the Locks to which you want to serialize the extra Keys and 4.
press the ”Next” button.
A list of targeted Locks is displayed. Conrm serialization and click 5.
“Save”.
Serialization of the extra Keys is now complete. Press “Finish” 6.
button to exit the wizard.
6.5 PUK CODE FOR THE KEY
In the event that a wrong Key password has been entered six 1.
consecutive times, the Key will be locked. To unlock the Key a
personal unlocking code, PUK is needed. The PUK code is delivered
with the Key. Store it safely.
Go to the ”Password” menu in the Key software and choose 2.
”Change password using PUK code...”.
Enter the PUK code into the ”PUK-code” eld.3.
Enter a new password into the ”New password” eld.4.
Conrm your password by typing it once more into the “New 5.
password (again)” eld.
Choose ”OK”.6.