17
Table of Contents
5.10 INPUT POWERING OPTIONS
Using the DC input plug
In case the operating voltage of 8-27V DC +/-10% is
available from an external power source with only stripped
wires, a DC input plug included in the sales package can
be used. The polarity marking in the plug shall be observed
and use of the cable saddle is recommended.
Please see picture 7 for the mounting.
Using the cable saddle
To secure the input power cable from being accidentally
pulled away from the power input jack, a cable saddle is
included in the sales package. The cable saddle is locked
in place by inserting it into the 4mm diameter hole in the
front panel.
Please see picture 8 for the mounting.
To Next Page
Loading...