| English
21
Observe local regulations when disposing of used containers.
UTILISATION
a）Starting the 4-in-1 multifunction tool
Do not start the appropriate module of the machine until all components have been
connected correctly! Attach the cutting blade of the brush cutter with a torque of 20
Nm and the cutting head of the mower with a tightening torque of 15Nm.
WARNING Fill the fuel tank before tightening the fuel tank cover.
Put the machine on a level, solid floor. Keep the cutting head away from the ground
and away from surrounding objects.
Press the priming bulb 5 to 8 times until fuel flows through the clear hose.
Position the choke in the closed position.
Set the ON/OFF switch to position "I". Make sure the cutting head is clear.
Keep the machine on the ground safely and then pull the starter until the engine
starts.
To Next Page
Loading...
