| English
18
of the chain (4) so that the chain can be lifted a few millimeters from the center
of the guide rail.
Secure the safety screw.
Installation of the harness
Hang the harness in its dedicated location on the tube. Adjust the size of the harness
properly to have a correct working position.
The shoulder strap is equipped with an emergency release mechanism. To detach
the machine from the shoulder strap in emergency situations, pull the rope to move
away from the machine.
⚠ WARNING!
Check the emergency release mechanism BEFORE operating the machine.
Be sure to hold the machine when operating the emergency release
mechanism.
When holding the machine firmly with your right hand, press both sides of
the belt buckle
FILLING TANK
⚠ WARNING!
Gasoline is highly flammable. Keep the fuel in specially designed cans.
Only fill the tank outside and do not smoke during the operation.
Fill the tank before starting the engine. Never remove the fuel tank cap, add
fuel while the engine is still running, or while the engine is still warm.
Avoid overfilling the tank: When excess fuel has escaped, do not attempt to
start the engine, but move the machine away and avoid any sources of ignition
in the vicinity until the fuel vapors Have dissipated.
Fully tighten all fuel filler caps and cans.
Fill the tank on the floor.
The engine must be started at a distance of at least 3 meters from where the
fuel tank has been filled.
To Next Page
Loading...
