| English
26
Care and maintenance
Regularly maintain your tool. This will keep your tool running smoothly and extend
its life. The tool must always be kept in good working order.
Do not use abrasive, caustic products to clean the tool. These types of products will
damage your tool.
Regular maintenance is important; Failure to maintain the tool will result in rapid
wear of parts that can cause malfunction and accidents. In addition, a poorly
maintained tool will cause poor work results and rapid aging
Wear protective gloves when servicing the tool.
The tool must be completely extinguished and cooled before any maintenance and
intervention.
Perform the machine maintenance as described in this manual. Use accessories
and replacement parts only recommended by us. Do not remove or modify system
components or modify the speed of the tool (serious accidents may result). Repairs
or modifications must be made only by a qualified service. No repairs or
modifications must be done by the user.
After work, it is essential to always check the entire machine and clean it.
Regular checks and maintenance:
Check the air filter (to be cleaned if necessary)
Check spark plug (replace if necessary)
The correct operation and quantity of the cutting wire.
60°max.
To Next Page
Loading...
