Total TP445441 - Preparing for Operations; Fuel Mixing and Refueling Procedures; Essential Pre-Operation Checks

PREPARING FOR OPERATIONS
WHEN MIXING GASOLINE WITH TWO CYCLE ENGINE OIL, USE
ONLY GASOLINE WHICH CONTAINS NO ETHANOL OR
METHANOL (TYPES OF ALCOHOL). THIS WILL HELP TO A VOID
POSSIBLE DAMAGE TO ENGINE FUEL LINES AND OTHER
ENGINE PARTS.
DO NOT MIX GASOLINE AND OIL DIRECTLY IN THE ENGINE
FUEL TANK.
IMPORTANT: Failure to follow proper fuel mix instructions may cause
damage to the engine.
1. When preparing fuel mixture, mix only the amount needed for the job
you are to do. Do not use fuel that has been stored longer than two
months. Fuel mixture stored longer than this will cause hard starting
and poor performance. If fuel mix has been stored longer than this
time. It should be removed and filled with fresh mixture.
WARNING
Ƹ
! DANGER
2. Never fill the fuel tank to the very top.
3. Never add fuel to the tank in a closed non-ventilated area.
4. Do not add fuel to this unit close to an open fire or sparks.
5. Be sure to wipe off spilled fuel before attempting to start engine
6. Do not attempt to refuel a hot engine
.
CHECK POINTS BEFORE OPERATION
1. Check for loose bolts. Nuts and fittings.
2. Check the air cleaner for dirt. Clean the air filter of all dirt. Etc. before
operation.
3. Check to be sure that protector is securely in place.
4. Check to be sure that is not leak.
5. Check to be sure the blade is not running in idling speed.
WARNING
Ƹ
! DANGER
The engine exhaust from this product contains chemicals known to
cause cancer, birth defects, or other reproductive harm.
