To Next PageTo Next Page
Need help?Do you have a question about the TOTALINE 1 For All P474-0100 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Stages | 1 Heat/1 Cool |
| Display | Digital |
| Hold Function | Yes |
| Battery Type | 2 x AA |
| Temperature Range | 45°F to 90°F |
| Temperature Display | Fahrenheit or Celsius |
Displays current and set temperatures, mode, and fan status.
Covers Mode, Fan, Up/Down buttons and Heat/Cool status lights.
Details meaning of Mode, Temperature, and Fan indicators on the display.
Explains current room temperature and desired set temperature displays.
Explains HEAT, COOL, AUTO, and OFF settings.
Guides on setting desired temperatures using Up/Down buttons.
Describes fan settings, including continuous operation.
Instructions to access setup screens via button combination.
Covers dual/single setpoints, heat pump, and reversing valve polarity.
Details settings for electric heat, deadband, setpoint difference, and cycles per hour.
Configuration for backlight and temperature units (Fahrenheit/Centigrade).
Provides a table of advanced setup steps, ranges, and defaults.
Explains how the second stage of heating or cooling is activated.
Details how to activate and use the emergency heat mode.
Explains the impact and usage of the electric heat setting.
Instructions for disabling and enabling the thermostat's buttons.
Describes how heat and cool setpoints interact in Auto mode.
Guides on restoring all settings to their factory default values.
Outlines warranty coverage, duration, and replacement process.
Lists conditions and damages not covered by the warranty.
