CONFIGURATION
Transmitter Display — The transmitter display is located in the center of
the transmitter. See Fig. 1. The following information can be displayed on the
screen:
• mode (OFF, HEAT, COOL, AUTO, or PROGRAM ON)
• fan setting (FAN ON or blank)
• override indication
• room temperature
• desired temperature
• time of day
• day of the week
• schedule period (Occupied 1, 2, or 3; Unoccupied)
• setup indicator (used in programming mode)
• lock indicator
• start indicator (used in programming mode)
Transmitter Indicator — A transmitter indicator is located in the middle
of the transmitter. See Fig. 2. The indicator will be lit if the transmitter is
sending a signal to the receiver.
3
To Next Page