Press
MODE
Press
MODE
HEAT
I2:00
Su
70
Pm
68
COOL
I2:00
Su
70
Pm
76
OFF
I2:00
Su
70
Pm
NON-PROGRAMMABLE WITH MANUAL CHANGEOVER - If the
thermostat is configured to be a non-programmable thermostat with
Manual Changeover, the following screens will be available by
pressing the MODE button.
Page 4.4
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
Heating Only
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
Cooling Only
OFF indicates both heating
and air conditioning
systems are turned off.
Off
Operating Mode when the Thermostat
is Configured to be:
Operating Mode when the Thermostat
is Configured to be:
Select the Mode by Pressing the MODE Button
4
TOTALINE
To Next Page
Loading...
