EasyManua.ls Logo

TouchTunes Ovation - Page 12

TouchTunes Ovation
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Preparing for Jukebox Installation
• Anti-static wrist strap (sometimes called a conducting wrist strap).
• Adjustable wrench for tightening bolts or nuts.
• Additional flat telephone cable to reconnect the wired remote.
If you are setting up a broadband connection for the Ovation, you may also require the following
tools:
• A laptop computer with a network card and a Web browser, such as Microsoft Internet Explorer
to test Internet connectivity.
• Pre-wired Cat5 network cable (or cable, crimp tool and RJ-45 connectors) to connect the laptop
and/or jukebox to the router.
If you are setting up a dial-up connection for the Ovation, you may also require the following
tools:
• USB modem
• Phone line polarity tester.
• Extra telephone cable with RJ-11 connectors.
• Four-conductor telephone modular wall jack.
• Four-conductor round telephone cable to connect the phone line from the demarcation point
to the modular wall jack.
• A Butt-In test set or analog phone without filters to listen to the newly installed phone line.
Note: The USB modem is an optional jukebox component. If a USB modem was not included
with the jukebox, you must request it from your distributor or TouchTunes.

Related product manuals