4TROUBLESHOOTING&FAQ’S
Error Code Answers
Error code ‘E3’
shows
The pressure cook has overheated. Allow it cool.
If sucient liquid has not been added to the cook pot this code my show.
Error code ‘E4’
shows and beeps 10
times
An issue has arisen with the pressure switch below the cook pot, ensure
that the pressure switch is engaged.
Air escapes from the
rim of the lid
There may be food residue on the sealing ring or the sealing ring may be
worn out. Remove the lid and check the sealing ring, it may need cleaning
or replacing.
Error code ‘E1’
shows
If this code shows it means that there is a broken circuit. Please return the
product.
Error code ‘E2’
shows
If this code shows it means that the connector has short circuited. Please
return the product.
Press CANCEL button to cancel problem codes,
then go into standby state.
The control panel will become inoperable when
an error occurs.
To Next Page
Loading...
