Why is my Tower Hobbies Fryer smoking?
Your Tower Hobbies Fryer might be smoking due to a few reasons. Ingredients with a high oil content can cause smoking, which is normal. Also, grease from previous use could be the culprit, so ensure you clean the unit properly after each use. Incorrect cooking settings can also lead to smoking, so adjust them as needed.
What to do if Tower Hobbies Fryer ingredients are not done?
If the ingredients aren't fully cooked in your Tower Hobbies Fryer, it might be because you've added too much food. Try cooking smaller batches. The temperature may also be too low; increase it and re-fry the food. Alternatively, the cooking time could be too short, so increase it and re-fry the food.
What to do if my Tower Hobbies Fryer does not work?
If your Tower Hobbies Fryer isn't working, first ensure it's plugged into an earthed wall socket. Check if the timer has been set, and set the time if it hasn't. Also, make sure you've pressed the ON/OFF key.
Why are my fresh fries fried unevenly in Tower Hobbies Fryer?
Unevenly fried fresh fries in your Tower Hobbies Fryer can result from using the wrong type of potatoes. Use fresh potatoes and ensure they stay firm during frying. Also, make sure to rinse the potato sticks properly to remove starch from the outside before frying.
How to make fried snacks crispy in Tower Hobbies T17137?
If your fried snacks aren't crispy when they come out of the Tower Hobbies Fryer, consider that some food materials need to be fried with oil. Coat the surface of the food with a thin layer of oil before frying. You might also be using the wrong type of snacks; use oven snacks or lightly brush some oil onto the snacks for a crispier result.
How to make fresh fries crispy in Tower Hobbies T17137 Fryer?
To achieve crispy fresh fries in your Tower Hobbies Fryer, ensure you dry the potato sticks properly before adding oil. For a crispier result, cut the potato sticks smaller and add slightly more oil.
Why is food not evenly fried in Tower Hobbies T17137?
If food isn't evenly fried in your Tower Hobbies Fryer, it might be because certain foods need to be shaken during cooking. Midway through the cooking process, pull out the cooking basket and shake it to separate the overlapped food, then push the basket back to continue.
What does error code E1 to E13 mean on Tower Hobbies Fryer?
If you see error codes E1 to E13 on your Tower Hobbies Fryer, it indicates a possible appliance malfunction. If this occurs, unplug the appliance immediately and contact the Customer Service team.
General| Brand | Tower Hobbies |
|---|---|
| Model | T17137 |
| Category | Fryer |
| Language | English |
To Next Page