Toyan Engine FS-S100 Series User Manual

拓陽精密科技 TOYAN ENGINE
13
to provide pressure to the tank.
4. START-UP POWER SUPPLY:
FS-S100x series has been installed starting motor, can achieve a one-click start, you only need to
buy standard 7.4V 25C lithium battery to achieve rapid start-up. Starting batteries with too low
or too high voltage will not guarantee the service life of starter motor. Do not use starter
batteries with incorrect voltage.
5. START-UP ENVIRONMENT:
Start the engine in an open, airy environment to avoid discomfort caused by burnt gases.
6. START-UP PLATFORM:
Since the engine will generate some vibration after starting, please place it on a stable and flat
platform to start.
7. HEAT DISSIPATION:
As the engine has been forced to dissipate heat by fans, high-speed rotating fan blades will be
dangerous. Do not touch them with your hands. If cracks are found in the blades during use,

Toyan Engine FS-S100 Series Specifications

General

Cooling Method/System	Air-cooled
Lubrication System	Splash lubrication
Ignition System	CDI (Capacitor Discharge Ignition)
Engine Type	Single-cylinder, 4-stroke, air-cooled
Fuel Type	Gasoline (90# or higher)