拓陽精密科技 TOYAN ENGINE
Make sure that the vehicle’s engine mounting surfaces are level and in the same plane. Poor
installation may cause distortion of the crankcase, bearings, etc., resulting in erratic running and
loss of performance. The recommended screws for securing the engine are 3.0mm inner
hexagonal socket type. If existing holes in the engine mount do not align perfectly with engine
installation hole. Do not force installation to avoid pressing the screws. If installed on other engine
platforms, it is recommended to purchase adjustment pads and install them between engine mount and
engine.
Please select the correct and stable engine mount Do not use unstable or defective engine mount
To Next Page
Loading...