拓陽精密科技 TOYAN ENGINE
INVESTIGATION METHOD OF ENGINE FAILURE TO START
If the engine fails to start, please carefully check the following:
●Whether the battery voltage is normal and the battery capacity is full or not
●Whether the glowplug has failed (spark plug electrode does not discharge)
●Fuel not reaching carburetor.
●Engine flooded, and do not force startup at this time. Remove glowplug, close needle-valve
and apply starter to pump out surplus fuel. (Cover the plug hole with a folded cloth, so that fuel
cannot splash into your body.) If it is forced to start without eliminating excess fuel, it may cause
irreparable damage to the starting system, as well as tension damage and deformation of the
connecting rod and crankshaft.
●Timing synchronous belt adjustment
All TOYAN engines have checked the location of timing belt before they leave the factory. If
power loss or unstable engine operation is found after several hours of execution time, the timing
belt needs to be checked and debugged to get the correct ignition information for the engine.
To Next Page
Loading...
Need help?
General
