拓陽精密科技 TOYAN ENGINE
re-start the engine to burn off any fuel that may remain inside. Repeat this procedure until the
engine oil is removed.
●Inject some corrosion-inhibiting after-run oil and rotate the crankshaft to distribute oil to the
working parts. Do not inject such oil into the carburettor, however, as it may cause deterioration
of the carburetor’s O-ring seals.
●Apply some solid lubricant to the camshaft and valve tappet , and ensure that the camshaft box
has enough lubricant for each operation.
Notes!
These maintenance programs will be stored for a period of time, resulting in corrosion risk
or start-up difficulties, if necessary , you can contact us to deal with.
To Next Page
Loading...
Need help?
General
