Toyan
When the engine speed changes rapidly, suddenly adjust from the high speed to the low speed, the flameout occurs,
please confirm whether the throttle is closed less than 1.5mm, or gradually reduce the auxiliary oil needle, (clockwise
rotation) gradually adjust the auxiliary oil needle, 20°as units, until the engine maintains a steady idle speed. In the
debugging process, the auxiliary oil needle should not be excessively reduced, so as not to cause engine have lean oil,
we recommend that the minimum value of auxiliary oil needle should not be less than 1 turn)
CARE AND MAINTENANCE:
The series of FS-S100AT is a very precise machine that you need to clean timely. Due to the impact of
environment and the fuel when using, the engine parts have a certain amount of wear and corrosion. So, TOYAN will
also provide you with long-term maintenance services. You can also complete the basic cleaning and maintenance
●Carefully clean the carburetor and remove dirt and grease from the inlet
●If an air filter is used, make sure the filter is clean and free from blockage
●Recommended that the air core used for more than one hour should be replaced in time. Be careful to remove
contaminated filter elements to ensure that dirt does not enter the carburetor
●Do not remove timing synchronous belt, you can use alcohol as a cleaning agent to wipe the belt. Do not use
corrosive detergent to clean synchronous belt, to avoid damage
●Spark Plug must be treated as consumables. Long running spark plug will not ensure the normal operation of the
engine and you can extend its life maintain the performance of the engine if you use it carefully,
◆Use appropriate tools for disassembly
To Next Page
Loading...