Toyan
INSTALLATION
Make sure the surface of engine mounting is flush and in the same flat. Improper installation may lead to
deformation of crankcase, bearing, etc. Unstable operation and performance degradation will happen. The 3.0mm
hexagon socket screws are recommended when fixed engine. If the existing hole in the engine bracket is not perfectly
aligned with the engine mounting hole, do not install with force. If installed on other engine platforms, please purchase
adjustment pads to fit between the engine bracket and the engine
Please use the right stable engine bracket Do not use weak or defective engine supports
If the width of engine bracket needs to be adjusted,please purchase TOYAN special adjustment pad
To Next Page
Loading...
Need help?
General
