’05MY CELICA U (L/O 0409)
253
2005 CELICA from Sep. ’04 Prod. (OM20888U)
2. Unplug the connector. Remove the
rubber cover.
If the connector is tight, wiggle it.
3. Release the bulb retaining spring
and remove the bulb along with the
socket. Install a new bulb into the
socket and return the bulb retaining
spring to its original position.
To install a bulb, align the tabs of the
bulb with the cutout of the mounting hole.
4. Install the rubber cover with the
“TOP” mark upward, and fit it se-
curely on the boss. Plug in the con-
nector.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
To Next Page
Loading...
