311
3-2. Using the audio system
3
Interior features
Selecting a registered device
Select “Select Device” on the Bluetooth
®
audio control
screen.
For more information: P. 309
■ Reconnecting a Bluetooth
®
phone
Vehicles with a smart key system
If the system cannot connect due to poor signal strength with the “ENGINE
START STOP” switch in ACCESSORY or IGNITION ON mode, the system
will automatically attempt to reconnect.
Vehicles without a smart key system
If the system cannot connect due to poor signal strength with the engine
switch in “ACC” or “ON” mode, the system will automatically attempt to
reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this
case, the connection must be made manually, or the phone must be rese-
lected.
To Next Page
Loading...
