554
6-1. Specifications
Engine
Model 2AR-FE 2GR-FE
Type
4-cylinder in line,
4-cycle, gasoline
6-cylinder V type,
4-cycle, gasoline
Bore and stroke
3.54 3.86 in.
(90.0 98.0 mm)
3.70 3.27 in.
(94.0 83.0 mm)
Displacement 152.2 cu.in. (2494 cm
3
) 210.9 cu.in. (3456 cm
3
)
Drive belt tension Automatic adjustment
Valve clearance
(engine cold)
Automatic adjustment
■ Drive belt type (2.5 L 4-cylinder [2AR-FE] engine only)
The high strength drive belt is used for the generator side drive belt.
When replacing the drive belt, use Toyota genuine drive belt or equivalent
high strength drive belt. If the high strength drive belt is not used, durability
of the belt may become less than expected. The high strength drive belt is a
belt with Aramid core which has higher strength compared to usually avail-
able belts with PET or PEN core.
To Next Page
Loading...
