Toyota 2014 Camry - Programming the Homelink

402
3-5. Other interior features
■ Programming the HomeLink

Point the remote control trans-
mitter for the device 1 to 3 in. (25
to 75 mm) from the HomeLink

control buttons.
Keep the HomeLink

indicator
light in view while programming.
Press and hold one of the
HomeLink

buttons and the
transmitter button. When the
HomeLink

indicator light
changes from a slow to a rapid
flash, you can release both but-
tons.
If the HomeLink

indicator light
comes on but does not flash, or
flashes rapidly for 2 seconds and
remains lit, the HomeLink

button
is already programmed. Use the
other buttons or follow the
“Reprogramming a HomeLink

button” instructions. (P. 405)
STEP 1
STEP 2