4-3. Do-it-yourself maintenance
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Vehicles without a smart key system: Turn the engine
switch off.
Vehicles with a smart key system: Turn the “ENGINE
START STOP” switch off.
Open the fuse box cover.
Engine compartment
Push the tabs in and lift the lid
off.
Under the instrument panel
Remove the lid.
After a system failure, see “Fuse layout and amperage rat-
ings” (P. 477) for details about which fuse to check.
To Next Page
Loading...
