Toyota 2014 Camry - Operating Homelink; Reprogramming a Homelink Button; Erasing the Entire Homelink Memory (All Three Programs)

405
3-5. Other interior features
3
Interior features
Operating HomeLink

Press the appropriate HomeLink

button. The HomeLink

indicator
light should come on.
The HomeLink

compatible transceiver in your vehicle continues to send
a signal for up to 20 seconds as long as the button is pressed.
Reprogramming a HomeLink

button
Press and hold the desired HomeLink

button. After 20 seconds, the
HomeLink

indicator light will start flashing slowly. Keep pressing the
HomeLink

button and press and hold the transmitter button until the
HomeLink

indicator light changes from a slow to a rapid flash.
Release the buttons.
Erasing the entire HomeLink

memory (all three programs)
Press and hold the 2 outside but-
tons for 10 seconds until the indi-
cator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink

memory.