Toyota 2L-T User Manual

Lists applicable Toyota Land Cruiser, Hilux, and 4Runner models.

Refers to the 2L, 3L Engine Repair Manual (Pub. No. RM123E).

Explains manual navigation, section structure, and repair procedure format.

Provides details on identifying the engine serial number and its location.

Outlines general guidelines and precautions for performing repairs safely and effectively.

Lists and defines common abbreviations used throughout the manual.

Describes the 2L-T and 3L engines, including cylinder count and displacement.

Diagnoses electrical system issues specific to the 2L-T engine in Austria.

Provides guidance on diagnosing and resolving issues related to diesel engine performance.

Diagnoses electrical system issues for 2L-T engines in other regions.

Details procedures for routine engine maintenance and performance adjustments.

Explains the inspection and function of the intake venturi system for specific models.

Outlines the process for measuring cylinder compression pressure to assess engine health.

Details the components and service procedures for the 2L-T cylinder head.

Describes the cylinder block components and inspection procedures.

Explains the function and operation of the turbocharger system in increasing engine output.

Lists critical safety and operational precautions for handling the turbocharger assembly.

Provides a guide to diagnose and resolve common problems like lack of power or excessive fuel consumption.

Offers a diagnostic flowchart for the turbocharger indicator and warning light system.

Outlines the on-vehicle inspection procedures for the turbocharger assembly.

Details the system circuit and inspection procedures for the fuel heater system on LJ models.

Covers the removal, installation, inspection, and adjustment of the fuel injection pump.

Explains the pressurized water forced circulation cooling system and its main components.

Addresses overheating issues and provides procedures for coolant checks and replacement.

Details the removal, inspection, and installation of the thermostat for the 2L-T engine.

Explains the pressurized, filtered lubrication system and its oil circuit.

Provides steps for checking engine oil quality, level, and pressure.

Outlines the procedure for changing engine oil and replacing the oil filter.

Covers the components, removal, inspection, and installation of the oil cooler and relief valves.

Covers the operation and inspection of the pre-heating system.

Details the system circuit and inspection for the Super Glow Type pre-heating system.

Explains the system circuit and inspection for the Fixed Delay Type pre-heating system.

Covers the inspection and operation of the starter relay for the LJ model.

Illustrates the electrical circuit diagram for the charging system.

Provides procedures for inspecting the charging system components on the vehicle.

Lists technical specifications for engine mechanical components and tune-up.

Provides torque specifications and performance data for the turbocharger system.

Lists specifications and adjustment data for the fuel system, including the injection pump.

Lists engine coolant capacity, thermostat specifications, and related torque values.

Details oil capacity, pressure specifications, and torque values for lubrication components.

Provides light lighting times and water temp sensor resistance for the starting system.

Lists battery gravity, alternator voltage, and belt tension specifications.