Need help?Do you have a question about the Toyota 30-7FBCU25 and is the answer not in the manual?
General| Model | 30-7FBCU25 |
|---|---|
| Load Capacity | 5, 000 lbs (2, 500 kg) |
| Lift Height | Varies with mast type (e.g., 130 in, 170 in, 187 in, 244 in) |
| Weight | Approx. 7, 935 lbs (3, 600 kg) (depending on configuration) |
| Power Source | Electric |
| Battery Voltage | 48 V |
| Tire Type | Pneumatic or Cushion |
Emphasizes employer's responsibility for safety and training operators per OSHA/ANSI.
Stresses understanding safety information and recognizing the alert symbol for hazards.
Covers formal training requirements, on-the-job training, and benefits of proper training.
Provides precautions for operating trucks equipped with the System of Active Stability (SAS).
Explains the OPSS functions that prevent operation when the operator is not seated.
Identifies and illustrates the location of all operating controls and the instrument panel.
Outlines essential daily and periodic inspections required by OSHA and ANSI for truck safety.
Explains the fundamental procedures for starting, driving, and shifting direction.
Explains the principles of truck stability and the dangers of overloading.
Outlines procedures for unexpected events like motor stops, load shifts, or pedestrian encounters.
Emphasizes safe battery handling, avoiding overdischarge, and keeping batteries clean.
Covers safe battery charging procedures and general care for battery health and performance.
Provides detailed instructions on battery handling, charging, and safety precautions due to acid and gas.
To Next Page
