Toyota 4RUNNER 2023 - Lights & Turn Signals; Headlights Operation; Automatic High Beams (AHB)

18
FEATURES & OPERATIONS
Low beam
(Original position)
Lights & turn signals
HEADLIGHTS
High beam flasher
(Pull)
Type A Type B
Type C
High beam (Push)
or
Automatic High Beams*
Daytime Running Light system (DRL)
Automatically turns on under certain conditions to make vehicle more visible to other
drivers. Not for use at night. (The parking brake needs to be released and the headlight
switch must be in the “
”, “ (type A only)”, or “ (type B and C)” position
while the vehicle is on.)
Automatic light cut off system (AUTO)
- Headlights are on: The headlights and taillights will turn off automatically 30
seconds after the vehicle is turned from ON to “ACCESSORY”
mode or OFF and a door is opened and closed. (If the “
”
switch on the Smart Key remote is pressed after all doors are
locked, the lights will turn off immediately.)
- Only the taillights are on: The taillights will turn off automatically if the vehicle is
turned from ON to OFF and the driver’s door is opened.
Automatic High Beams system (AHB)*
Automatically switches between high and low beams as appropriate to enhance
vision at night.
Refer to Toyota Safety Sense™ P (TSS-P) in this guide or the “Owner’s Manual” for
more details on the Automatic High Beams feature.
* Operating conditions must be met. Refer to the “Owner’s Manual” for details.
Operating the switch turns on the headlight indicator .
Parking lights (
) Parking lights ( )
Parking lights (
)
DRL ON (
) Auto ( )
Auto (
)
DRL OFF ( )
Headlights (
) Headlights ( )
Headlights (
)
DRL OFF (
)